Daikin directional control solenoid check valves
Features
- A solenoid valve adopting low watt coil (DC: 5W, AC: 12W).
- Possible to drive directly by means of programable sequence controller due to the low current characteristics.
Features
- Realized high pressure and large flow rate such as 35MPa {350kgf/cm2}, 100L/min. (G02), 160L/min. (G03).
- Mostly suits for the structure not only with dust-proof and water-proof complying with IEC Pub529 IP65, but also coping with Europe safety standards (CE).
Features
- Realize high pressure and large flow rate such as 35MPa {350kgf/cm2}, 300L/min.
- Mostly suits for the structure not only with dust-proof and water-proof complying with IEC Pub529 IP65, but also coping with Europe safety standards (CE).
- Since check valve built-in type for pilot pressure is available, a resistance valve for raising pilot pressure is not necessary.
- A hydro-center type is required, when a main valve spool will be demanded to return to the neutral securely.
Features
- As a polot valve adopts a high reliable KSO-G02, it polongs a life and can get secure operated.
- In addition to dust-proof and water-proof structure compliying with IEC Pu529 and Ip65, it best suits the products coping with The Europe safety standards (CE).
Features
- The combined application with pressure compensation valve (MUV, MDM) makes it possible to gain the flow characteristics with pressure compensation corresponding to the regulating amount of the flow adjusting screw.
- This valve by itself has a shock-less effect as a solenoid pilot switching valve. If 02 size stack valve (throttle valve, reducing valve) is used for a pilot system, more efficient shock-less effect can be expected.
- Possible to stack in multiple linking to a solenoid proportional switching valve and multiple types.
Features
- Fluid adhering phenomena will never happen even if it is used for long time in pressurized condition.
Features
- Direction control valve to switch the oil flow direction by handling a spool with a manual arm directly.
- Combining with 02 size stack valve, possible to make structure of many kind of circuit.
Features
- Since when it is built in the line, if its reaches a clacking pressure, it lets a check valve push to open and flow oil to one direction, preventing a reverse stream.
Features
- Since when it is built in the line, if its reaches a clacking pressure, it lets a check valve push to open and flow oil to one direction, preventing a reverse stream.
Features
- When the pressure reaches a clacking pressure, it pushes a check valve to open and let oil flow only to one direction. Besides, oil can flow to reverse direction by pushing up the check valve caused by external pilot pressure.
- Decompression type, which opens a small check valve before a main valve will open, is available.
Features
- This valve is used as a suction/exhaust valve between an oil hydraulic cylinder and a tank. In a quick forward stroke of a large press machine, this valve sucks oil from a tank to an oil hydraulic cylinder, while in an pressurization process, it obstructs a reverse flow from a hydraulic cylinder to a tank , and in a return process, exhausting oil from a hydraulic cylinder to a tank.